Gibson PB-3 Mastertone #9524-7

#9524-7 Gibson Mastertone banjo PB-3 front

#9524-7 Gibson Mastertone banjo PB-3 pot    #9524-7 Gibson Mastertone banjo PB-3 logo    #9524-7 Gibson Mastertone banjo PB-3 Mastertone block    #9524-7 Gibson Mastertone banjo PB-3 resonator back    #9524-7 Gibson Mastertone banjo PB-3 resonator detail    #9524-7 Gibson Mastertone banjo PB-3 factory order number in resonator    #9524-7 Gibson Mastertone banjo PB-3 Mastertone label    #9524-7 Gibson Mastertone banjo PB-3 factory order number in rim

 #9524-7 Gibson Mastertone banjo PB-3 tone ring and rim    #9524-7 Gibson Mastertone banjo PB-3 #521 case

This banjo would have left the factory as a 1930 PB-3 Mastertone with wreath inlays, identical to its "littermates" PB-3 Mastertone #9524-25 and PB-3 Mastertone #9524-27 (see Gibson banjo serial numbers vs. factory order numbers).  Somewhere along the way, however, the banjo's plectrum neck was replaced with a neck from a Kay tenor banjo.  The Mastertone block and the diamond pieces from the wreath inlay pattern were salvaged from the plectrum neck and inlaid in the tenor fingerboard; the Gibson logo was removed from the peghead of the plectrum neck and inlaid on the back of the tenor peghead.  The Grover tuners were also transferred from the original neck and the original #521 Geib and Schaefer plectrum-length case remained with the banjo.  The pot is in excellent, original condition with a one-piece flange and twenty-hole flathead tone ring.

Photos courtesy of an anonymous collector.
 


Home