Kel Kroydon KK-11 tenor #9797-10

#9797-10 Kel Kroydon KK-11 tenor banjo by Gibson front

#9797-10 Kel Kroydon KK-11 tenor banjo by Gibson neck    #9797-10 Kel Kroydon KK-11 tenor banjo by Gibson front angled    #9797-10 Kel Kroydon KK-11 tenor banjo by Gibson back    #9797-10 Kel Kroydon KK-11 tenor banjo by Gibson resonator off    #9797-10 Kel Kroydon KK-11 tenor banjo by Gibson pot and neck    #9797-10 Kel Kroydon KK-11 tenor banjo by Gibson pot angled    #9797-10 Kel Kroydon KK-11 tenor banjo by Gibson hardware

#9797-10 Kel Kroydon KK-11 tenor banjo by Gibson hardware    #9797-10 Kel Kroydon KK-11 tenor banjo by Gibson hardware    #9797-10 Kel Kroydon KK-11 tenor banjo by Gibson flange    #9797-10 Kel Kroydon KK-11 tenor banjo by Gibson inside pot    #9797-10 Kel Kroydon KK-11 tenor banjo by Gibson factory order number in rim    #9797-10 Kel Kroydon KK-11 tenor banjo by Gibson factory order number in resonator    #9797-10 Kel Kroydon KK-11 tenor banjo by Gibson in case

Instruments under the odd brand name Kel Kroydon were made by Gibson for the J.W. Jenkins Music Company of Kansas City, Missouri between 1929 and 1931 (Gibson would also use the Kel Kroydon brand name on a line of wooden toys from 1931 to 1933).  The two Kel Kroydon banjo models were the KK-10 and the KK-11, which later appeared in the Gibson-brand line as style 11Kel Kroydon banjos featured pearloid on the peghead, fingerboard, and resonator back, while the rim, resonator sides, and neck were maple typically painted black on the KK-10 and blue on the KK-11; stenciled designs take the place of fingerboard inlay.  Kel Kroydon banjos had no Mastertone tone ring, but only a small-diameter brass hoop sitting on top of the rim; the thick maple rim and one-piece flange, however, were the same as those used on the more expensive Mastertone models of the period.  Kel Kroydon banjos did not feature the adjustable truss rod common to all Gibson-brand banjos; interestingly, a rod is present in the neck of these banjos but no cavity was routed out to provide access at the peghead.

Owner Jim Bondra was fortunate to locate #9797-10 (see Gibson banjo serial numbers vs. factory order numbers) just one year after acquiring its littermate, #9797-34, originally owned by Vineta Hemman of Painesville, Ohio.

Photos courtesy of Jim Bondra.
 


Home